Birch Ply Printing

**please note** as Birch Ply is mostly sourced from Russia, there is a mass supply shortage and is mostly unavailable, or is being sold at a ridiculous prices. We are currently a Poplar Ply alternative. It has the same layered finish to the sides and the print quality is the same, albeit the actually sheet is lighter in weight.

We now offer full colour printing onto wood. Using super high quality grade B/BB birch plywood. This offers a fantastic alternative to other medias.

• Available in 12mm
• From renewable resources
• FSC® or PEFC certification
• Custom contour cutting available
• Available with white ink printing.

Please note:

Due to the processes printing onto wood required in cutting the Birch Ply we have a tolerance of +/- 1mm - Please try to avoid thin borders and objects close to the edge as this exaggerates any small movements.

Possible issues printing onto wood:

Unlike paper which is very consistent, our birch ply has various colours of the wood flowing though it. This adds to the effect of the print and final finish but can also place unwanted flecks or specks of grain in areas which you may not want them ie. on faces within eyes or nose or in areas of print where the design makes them obvious. If you want to avoid this then please use the spot or flood white ink printing options where a layer of white ink is laid down by the printer under neath the colour which adds a blockout effect to stop the texture showing through.